Rabbit Rose Toy with Suction & Telescopic Vibrating Shaft
Rabbit Rose Toy with Suction, Vibration and Telescopic Movement
The Rabbit Rose Toy combines a rose-shaped suction head, a long telescopic shaft and a short rabbit arm in one connected device. Available in Red and Purple, it offers a different shape from a compact hand-held rose: the head sits above a curved body that joins the two lower contact components. Two front controls are visible on the rose body.
The listed functions include ten suction patterns and three telescopic vibration settings. The product animation illustrates movement along the long shaft, vibration around the lower components and the suction function at the rose opening. Compare these mechanisms and the component layout before choosing a model; the shared rose appearance does not make every rose vibrator work the same way.
Three Components with Different Roles
The rose head has a central opening surrounded by layered petals. Its suction function is intended for external contact. Start with light pressure and adjust the position gradually rather than pressing the opening firmly against the skin. Keep the opening clear of obstruction and stop if the contact becomes uncomfortable.
The long shaft has a rounded end and a textured transition near the tip. Its illustrated telescopic movement is distinct from the shorter rabbit arm beside it. The short arm provides a separate contact shape within the same connected body. Reposition gently, support the device and avoid pulling or forcibly bending either arm. The animation is a mechanism illustration, not a measurement of travel distance.
Ten Suction Patterns and Three Telescopic Vibration Settings
The suction-mode image identifies ten patterns. These can vary in rhythm, so the count is not a guarantee of ten progressively stronger speeds. The product specification also lists three settings for the telescopic vibration function. It does not provide a separate count for the short rabbit arm or establish that every component can be controlled independently.
The front of the rose body shows two buttons. Follow the instructions included with your unit to identify the power sequence, function switching and setting changes. An exact button map and press duration are not supplied by the available diagrams. Start with a comfortable setting, change one function at a time and make sure you know how to stop the device before using its moving shaft.
Read the Dimensions as Outer Measurements
The size illustration labels the device as approximately 227 mm in overall length, with a 55 mm rose-head width and a 36 mm shaft width. It also lists a weight of approximately 260 g. These measurements help you compare the complete shape and size with other rabbit designs.
The 227 mm value is the full outer length shown in the picture, not an insertable length. Neither the shaft’s usable insertion length nor the telescopic stroke is established by that diagram. Consider the component shape, width and relationship between the long and short arms alongside your preferences. Do not assume that the illustrated extension represents a measured stroke or a force rating.
Silicone and ABS Construction
The listed materials are silicone and ABS. Inspect the surface, moving section, short arm and suction opening before use. Follow the supplied instructions for lubricant compatibility and contact placement, and stop if you notice damage or a change in the mechanism’s movement. Avoid stretching the textured moving section or forcing the shaft against resistance.
Clean the device according to its care instructions after use. Pay attention to the rose petals, opening, textured shaft section and the junction around the rabbit arm. Use gentle cleaning methods and avoid sharp tools or attempts to dismantle the moving parts. Remove residue carefully and let the device dry completely before storage.
IPX6 Care and Water Exposure
The product specification and water-resistance illustration identify an IPX6 rating. This listing does not treat that rating as approval for bath immersion or underwater operation. Follow the unit’s instructions for rinsing and water exposure, and keep the USB cable and power source dry.
Switch all functions off and disconnect charging equipment before cleaning. Do not charge while the device or its contacts are wet. After cleaning, dry the rose opening, body, arms and rear contact area fully. Store the device away from heat and direct sunlight, with no load on the shaft or rabbit arm.
Magnetic USB Charging and Battery Estimates
The charging image shows a USB-A cable with a two-contact magnetic connector that aligns with contacts on the rear of the rose body. Use the matching charger specified for this model and a suitable USB power source that meets the supplied instructions. Similar magnetic rose cables may differ in contact spacing, shape or electrical requirements.
The listed charging time is approximately 150 minutes, with approximately 50 minutes of operation afterward. These are estimates rather than guaranteed durations: selected functions, settings, battery condition and the power source affect actual results. Keep the device switched off during charging and follow the charging-indicator directions included with your unit.
Specifications at a Glance
| Colors | Red or Purple |
|---|---|
| Design | Rose suction head, long telescopic shaft and short rabbit arm |
| Listed settings | 10 suction patterns and 3 telescopic vibration settings |
| Outer dimensions | Approximately 227 mm overall length, 55 mm head width and 36 mm shaft width |
| Weight | Approximately 260 g as illustrated |
| Materials | Silicone and ABS, as listed |
| Water rating | IPX6; follow care instructions and do not assume immersion suitability |
| Charging | Rear magnetic USB connection; approximately 150 minutes as listed |
| Operating estimate | Approximately 50 minutes; duration varies by use and battery condition |
Compare Other Connected Rose Designs
For another telescopic design with different head options, compare the Rose Toy Extendo in Tongue or Suction versions. For a connected vibrating arm without this rabbit layout, explore the Rose Toy Deluxe. Compare the mechanisms and component dimensions alongside the listed settings.
Frequently Asked Questions
Does 3-in-1 mean three suction settings?
No. The model combines suction, vibration and telescopic movement. Ten suction patterns and three telescopic vibration settings are listed separately.
Is 227 mm the insertable length?
No. That is the full outer length in the size diagram. A usable insertable length and telescopic stroke are not specified.
Can IPX6 be used as an immersion rating?
This listing does not approve immersion or underwater operation. Follow the care and water-exposure instructions supplied with your unit.
Do Red and Purple have different prices?
Both color options are listed at the same price. Select your preferred color before adding the product to your cart.
Orders ship in discreet, plain packaging with no product description on the outside.
Most orders are processed within 1-2 business days. Typical delivery windows are 7-10 business days for North America, the EU and the UK, and 10-15 business days for Oceania and Asia.
You will receive tracking details as soon as your order leaves our warehouse.
Shop with confidence. Every Rosezoe product includes a 12-month warranty for manufacturer defects.
If your item arrives damaged or does not work as expected, contact our support team and we will help with troubleshooting or replacement.
Eligible return requests must be submitted within 30 days of delivery. Items must meet the eligibility conditions and exclusions in our Refund Policy; intimate products generally must be unused, unopened and in their original packaging.
For damaged, defective or incorrect items, contact support@rosezoe.com with your order number so we can review the issue.
Return requests and support conversations are handled discreetly.
Find the right rose toy guide
Compare models, get started, or find practical help for your RoseZoe product.